Instead, use half-strength control inputs (if using an XBox controller). Avoid full-deflection manoeuvring above 350km/h as this may result in structural damage. At speeds above 300km/h negative pitch will be necessary to maintain level flight. When the aircraft reaches 300km/h, it will fly straight and level without input. Once above 220km/h, raise the gear by pressing N. The aircraft will try to nose down with the gear extended due to drag. If using an XBox controller, pull the left stick down only half way to avoid a stall. Release the Brakes when the engine holds a steady Rpm.Īt 180km/h or above, pull up gently and take off. Then Throttle up with T while Holding Z to hold position(Rb when using an Xbox Controller). With the aircraft on the runway, Press M for Setting the flaps to takeoff position. When spawning look for the motor rpm to stabilize, if they are slowing down hold V to restart the engines. INFORMATION (please read before posting questions): added support for generic surface controller.added stall values and adjusted lift and drag.reduced instabilities and overall jbeam rework.added fuel tanks with variable amounts of fuel.Thanks to PrimeTheBomber for letting us use his liveries.
If you don't want information about thermals or no engine, you can disable them in the vehicle's parts menu.īest manueverability if the airspeed is in the green marked range.įly slower if you are in a thermal, this will give you more vertical Speed.īe carefull if airspeed is in the yellow marked range.Thanks to Diamondback, B25Mitch and others for helping to revive the B25. The red arrow points towards the nearest thermal. If you want to change the difficulty of the Simulation you can change the values in the tuning section of the vehicle So this is why this mod has some sort of wind simulation for thermal lift. W hat is a glider without thermal lift? Kind of boring. You may need to wiggle the flightstick left-right to overcome friction. Capacity: 100 kg (220 lb) water ballastīecause this doesn't have an engine you can spawn it in the air,īy pressing F8 then pgUp for a while and then F7 or just use the engine.The Glaser-Dirks DG-100 of 1974 is the first sailplane manufactured by Glaser-Dirks, developed from the Akaflieg Darmstadt D-38, the Standard class sailplane was designed by Wilhelm Dirks.
0 kommentar(er)
